1. Remove the old broken garage door spring from its brackets using a screwdriver.
2. Disassemble the bracket into two pieces.
3. Using pliers, remove both screws holding the top piece of the bracket to the wall.
4. Repeat step 1-3 until removing all the bolts securing the spring to the center bracket.
5. Once removed, take the spring apart and inspect each part for wear and tear.
6. Clean the area where the spring was attached to the metal frame.
7. Install the new garage door spring according to manufacturer instructions.
8. Reattach the top piece of the original bracket to the wall using the same set of screws used to secure the spring.
9. Replace the bottom piece of the original bracket over the existing bolt holes.
10. Attach the remaining side panels of the original bracket to cover the gaps left behind after removal.
11. Reconnect the wires from the motor assembly to the battery terminals.
12. Close the panel and reattached the handle to test if everything works fine.
13. Enjoy your newly repaired garage door!

Tips on how to reinstall the garage springs

• Before reconnecting any parts of the garage door, ensure that the door closes properly before connecting anything else. This way you can avoid damaging other parts of the door during installation process.
• Make sure the new garage door springs fit perfectly in place. If they don’t, try adjusting them by loosening one end with an adjustable wrench and then tightening again.
• After fitting the garage door spring, check whether the tension has been adjusted as per manufacturer specifications.
• Check the position of the rollers carefully. They shouldn’t touch the track rails at any point. Also, make sure that the roller bearings have enough clearance between them.
• When installing the upper tracks, make sure that the lower ones are anchored against the ceiling. Otherwise, they might come loose while opening/closing the door.

EM Garage Doors - Garage Door Parts & Accessories

A garage door opener will be required to operate any automatic garage doors installed with our products. If you already have an existing manual garage door opener, please check with us regarding compatibility before ordering.

How much does garage door spring replacement cost?

Garage doors are one of the most important parts of your home, and they can be a real pain to work on if you don’t know what you’re doing. If you have an old garage door that is sagging or is just plain worn out, it may need some serious repair before it becomes too dangerous for anyone inside your house to use. The good news is that there are many things you can do yourself to make sure your garage door stays in top shape until you decide to replace it with something new.

What type of garage door springs do I need?

Garage door springs are available in different types, including: torsion, extension, compression and hybrid. Each type provides specific functions, such as safety, durability, strength. The most common types include:

Torsion Springs–These are considered the strongest because their design allows them to withstand high levels of stress without breaking down. Torsion springs also allow simple operation of the door because of their long life span and low maintenance requirements. However, this type of garage door spring requires more space when compared to others.

Extension Spring–Extension springs work well with heavy-duty applications because of their ability to absorb large amounts of energy. Their major drawback lies in their inability to support heavier weight loads.

Compression Springs–Compression springs are usually found in lighter commercial grade models but still offer outstanding performance. Because these springs require less material, they are cheaper to manufacture. Compared to other types of garage door springs, compression springs are easier to install and maintain.

Hybrid Springs–Hybrid springs combine elements of both torsion and extension springs so they can perform better than single element springs.

Where can i find cheap garage door springs?

We provide a 24-hour emergency service for all kinds of garage door problems such as Cable drum, broken cables or openers, stuck panels, damaged hinges. Our team is highly trained and equipped with latest tools and equipment to fix many garage door issues within minutes.

We use only top quality materials and components from trusted manufacturers like Chamberlain, Genie, Wayne Dalton, LiftMaster, Craftsman, Clopay, Sommerville, and many more. All our technicians undergo rigorous training programs which enable them to repair most common garage door problems efficiently. Call now to schedule an appointment today!

Our services include:

24-Hour Emergency Services: No matter what time you call, we’ll get there fast. You won’t even know we were here until we tell you about it later.

Same Day Repairs: We understand that sometimes emergencies happen; however, we strive hard to complete repairs same day.

Free Estimates: Get free estimates over phone or email. Just give us a call or send us an e-mail.

No Hidden Fees: There are no hidden fees. Whatever price quoted is final.

How long does it take to change our garage door springs?

If your garage door has been damaged by a storm, hurricane, tornado, fire, earthquake, vandalism, etc., then chances are good that you may not open the door yourself. In such cases, contact one of our professional service providers who specialize in emergency garage door repairs. They will arrive at your home within 30 minutes after receiving your call and fix your problem right away.

• Garage Door Repair Service
• Emergency Garage Door Service
• Residential Garage Doors
• Residential Torsion Springs
• Electronic Garage Door Opener Repair
• Automotive Garage Door Installation
• Commercial Garage Door Replacement
• Garage Door Cable Replacement
• Garage Door Panel Replacement
• Garage Door Roller Bearing Replacement
• Garage Door Track Replacement

Garage Door Company EM Garage Doors is committed to providing excellent customer service for all its customers. Our qualified professionals are available 24 hours per day, 7 days a week, to assist you with questions you may have.

When Should I Replace My Garage Door Springs?

There are two major factors that determine how often your garage door needs replacing garage door springs.

The first factor is the amount of wear on the springs themselves. As mentioned earlier, garage doors operate by using spring tension between two metal plates called tracks. This tension causes the track to move up and down as the door opens and closes. When the force required to open or close the garage door exceeds the strength of the garage door’s springs, then the garage door will not be able to properly function. If you notice excessive noise coming from your garage door, then chances are good that one spring has worn out. In addition, if the garage door appears to be difficult to raise or lower, then the problem could lie within the garage door itself rather than the springs.

The second factor determining whether to replace your garage door springs is the age of the garage door itself. Over time, the garage door becomes weaker and sags slightly at the bottom. This sagging makes opening and closing the garage door much harder. It is recommended that you replace your garage door springs every five years.

How many times would you expect to see a garage door problem before calling a company like EM Garage Doors?

Well, let me tell you something about our business model. Our goal isn’t to sell you another product. Instead, we want to earn your trust through honest service and fair pricing. That means we don’t charge extra fees for coming to your home and inspecting the issue. We also offer free estimates, no-obligation price quotes, and easy financing options.